Week 11

Department: UPCR – Final Inspection
Company: Delphi TVS, Sriperumbudur

Day 73 (Monday)
Date: 02/03/2026
I learned about the Flush Pin Gauge used in Final Inspection. The gauge is used to verify whether pins and assembled components are positioned at the correct height level. I understood the importance of checking flush conditions to ensure proper assembly quality and prevent fitment issues. I also practiced using the gauge correctly and interpreting inspection results.

Day 74 (Tuesday)
Date: 03/03/2026
I learned the application of the Angle Position Gauge. This gauge is used to verify the angular alignment of critical components in the pump assembly. I understood how improper angular positioning can affect pump performance and quality. I also observed the correct method of placing and verifying the gauge during inspection.

Day 75 (Wednesday)
Date: 04/03/2026
I learned to use the M14 Thread GO Gauge and M14 Thread NO-GO Gauge. The GO Gauge confirms that the thread is manufactured correctly and allows proper assembly, while the NO-GO Gauge ensures that the thread does not exceed the specified tolerance limit. This activity improved my understanding of thread quality inspection and acceptance criteria.

Day 76 (Thursday)
Date: 05/03/2026
I started performing inspection activities faster while maintaining accuracy and quality standards. Through continuous practice, I improved my efficiency in checking pumps and identifying defects without missing critical inspection points.

Day 77 (Friday)
Date: 06/03/2026
I further improved my inspection speed and confidence in handling Final Inspection responsibilities. I was able to complete inspection activities more efficiently by following standard procedures and maintaining concentration throughout the process.

Day 78 (Saturday)
Date: 07/03/2026
Week Off.

Day 79 (Sunday)
Date: 08/03/2026
I improved my ability to use the inspection software more quickly and accurately. I learned how to enter inspection data, verify records, and complete documentation efficiently. This helped me understand the importance of software systems in maintaining traceability and quality records in the manufacturing process.

Popular posts from this blog

Trainee hall

Image
Company: Delphi TVS, Oragadam Area: Trainee Hall Day 1 – Thursday (Date: 18/12/25) Today was my first day of internship at Delphi TVS, Sriperumbudur. We were taken to the trainee hall. The trainer explained about the company profile, history, and its role in the automotive industry. Company rules, discipline, and work ethics were also explained. The session was informative and useful. Day 2 – Friday (Date: 19/12/25) Today we learned about industrial safety,The trainer explained safety rules to be followed inside the plant. The importance of wearing PPE such as helmet and safety shoes was explained. Safety signs and emergency procedures were also discussed. This session helped me understand safety practices. Day 3 – Saturday (Date: 20/12/25) Today the session was about manufacturing and quality basics. The trainer explained the basic production process and the importance of quality at each stage. We also learned about inspection and defect prevention like human act . This session gave m...
Read more

Week 3

Week 3  Day: 19 (Monday) Date: 05/01/2026 Learned about different UPCR pump models manufactured for various customers in the Final Inspection area. Day: 20 (Tuesday) Date: 06/01/2026 Observed customer-specific pump variations and understood their application-based differences. Day: 21 (Wednesday) Date: 07/01/2026 Supervisor explained the names and functions of UPCR pump parts. Day: 22 (Thursday) Date: 08/01/2026 Leave is taken to receive the laptop in the college Day: 23 (Friday) Date: 09/01/2026 Leave is taken to receive the laptop in the college Day: 24 (Saturday) Date: 10/01/2026 Leave is taken to receive the laptop in the college Day; 25 (Sunday) Date: 11/01/2026 Learned the difference between each pump type based on design and markings.
Read more

Week 6

Week:6 Day: 39 (Monday) Date: 26/01/2026 Observed the complete final inspection workflow. Learned how inspection consistency is maintained by following standard checkpoints for each UPCR pump. Day: 40 (Tuesday) Date: 27/01/2026 Practiced visual inspection under the guidance of the final inspector. Learned to identify minor defects, surface finish issues, and part alignment. Day: 41 (Wednesday) Date: 28/01/2026 Learned about communication during final inspection. Understood how abnormalities are reported to the team leader for corrective action. Day: 42 (Thursday) Date: 29/01/2026 Observed inspection approvals and marking process. Learned the importance of documentation and traceability after final inspection. Day: 43 (Friday) Date: 30/01/2026 Followed SOP and visual aids during inspection activities to maintain accuracy and quality standards. Day: 44 (Saturday) Date: 31/01/2026 Revised final inspection process, visual defect identification, documentation, and 5S practices followed at t...
Read more